当前位置: 首页 » 政策法规 » 国外法规 »§176.300 杀黏菌剂(Slimicides)

§176.300 杀黏菌剂(Slimicides)

扫描二维码 分享好友和朋友圈
放大字体  缩小字体 2011-10-03 11:03:34  来源:GPO  浏览次数:3370
核心提示:凡符合下列规定条件的杀黏菌剂,可安全的用于接触食品的纸和纸板的制造:杀黏菌剂作为抗微生物剂的一类,在符合规定的各种限制条件下,由本节(c)中所列的黏质控制物质的一种或一种以上所制得的杀黏菌剂,可加入本节(d)中所规定的各种辅料,杀黏菌剂可加于纸和纸板生产的用水中。为保证安全使用,在杀黏菌剂的标签或标识上应注明适当的使用说明。
发布单位
FDA
FDA
发布文号 69 FR 24512
发布日期 2004-03-04 生效日期 暂无
有效性状态 废止日期 暂无
备注 凡符合下列规定条件的杀黏菌剂,可安全的用于接触食品的纸和纸板的制造:杀黏菌剂作为抗微生物剂的一类,在符合规定的各种限制条件下,由本节(c)中所列的黏质控制物质的一种或一种以上所制得的杀黏菌剂,可加入本节(d)中所规定的各种辅料,杀黏菌剂可加于纸和纸板生产的用水中。为保证安全使用,在杀黏菌剂的标签或标识上应注明适当的使用说明。

   §176.300 Slimicides

      (a) Slimicides may be safely used in the manufacture of paper and paperboard that contact food, in accordance with the following prescribed conditions:

  (1) Slimicides are used as antimicrobial agents to control slime in the manufacture of paper and paperboard.

  (2) Subject to any prescribed limitations, slimicides are prepared from one or more of the slime-control substances named in paragraph (c) of this section to which may be added optional adjuvant substances as provided for under paragraph (d) of this section.

  (3) Slimicides are added to the process water used in the production of paper or paperboard, and the quantity added shall not exceed the amount necessary to accomplish the intended technical effect.

  (b) To insure safe usage, the label or labeling of slimicides shall bear adequate directions for use.

  (c) Slime-control substances permitted for use in the preparation of slimicides include substances subject to prior sanction or approval for such use and the following:

     
 

List of substances  Limitations
Acrolein  
Alkenyl (C16-C18) dimethylethyl-ammonium bromide  
 n-Alkyl (C12-C18) dimethyl benzyl ammonium chloride  
 1,2-Benzisothiazolin-3-one  At a level of 0.06 pound per ton of dry weight fiber.
 Bis(1,4-bromoacetoxy)-2-butene  
 5,5-Bis(bromoacetoxymethyl) m-dioxane  
 2,6-Bis(dimethylaminomethyl) cyclohexanone  
 1,2-Bis(monobromoacetoxy) ethane [CA Reg. No. 3785-34-0]  At a maximum level of 0.10 pound per ton of dry weight fiber.
 Bis(trichloromethyl)sulfone  
 4-Bromoacetoxymethyl-m-dioxolane  
 2-Bromo-4′-hydroxyacetophenone  
 2-Bromo-2-nitropropane-1,3-diol (CAS Reg. No. 52-51-7)   At a maximum level of 0.6 pound per ton of dry weight fiber.
 β-Bromo-β-nitrostyrene  At a maximum level of 1 pound per ton of dry weight fiber.
 Chloroethylenebisthiocyanate  
 5-Chloro-2 - methyl - 4 - isothiazolin-3-one calcium chloride and 2-methyl-4-isothiazolin-3-one calcium chloride mixture at a ratio of 3 parts to 1 part  At a level of 2.5 pounds per ton of dry weight fiber.
 Chlorinated levulinic acids  
 Chloromethyl butanethiolsulfonate  
 Cupric nitrate  
 n-Dialkyl (C12-C18) benzylmethylammonium chloride  
 
Code of Federal Regulations 236
 
 1,2-Dibromo-2,4-dicyanobutane (CAS Reg. No. 35691-65-7)  At a maximum level of 0.005% of dry weight fiber.
 2,2-Dibromo-3-nitrilopropionamide  At a maximum level of 0.1 lb/ton of dry weight fiber.
 2,3-Dibromopropionaldehyde  
 4,5-dichloro-1, 2-dithiol-3-one (CAS Reg. No. 1192-52-5)  For use only at levels not to exceed 10 milligrams per kilogram in the pulp slurry.
 1,3-Dihalo-5,5-dimethylhydantoin (where the dihalo (halogen) may be bromine and/or chlorine) that may contain no more than 20 weight percent 1,3-dihalo-5-ethyl-5-methylhydantoin (where the dihalo (halogen) may be bromine and/or chlorine).  At a maximum level of 1.0 kilogram (kg) per 1,000 kg of dry weight fiber.
 4-(Diiodomethylsulfonyl) toluene (CAS Reg. No. 20018-09-1).  At a maximum level of 0.2 pound per ton (100 grams/1,000 kilograms) of dry weight fiber.
 3,5-Dimethyl 1,3,5,2H-tetrahydrothiadiazine-2-thione  
 Dipotassium and disodium ethylenebis(dithiocarba-mate)  
 Disodium cyanodithioimidocarbonate  
 n-Dodecylguanidine hydrochloride  At a maximum level of 0.20 pound per ton of dry weight fiber.
 Glutaraldehyde (CAS Reg. No. 111-30-8)  
 2-(p-hydroxyphenyl) glyoxylohydroximoyl chloride (CAS Registry No. 34911-46-1)  At a level of 0.02 pound per ton of dry weight fiber.
 2-Hydroxypropyl methanethiol sulfonate  
 2-Mercaptobenzothiazole  
 Methylenebisbutanethiolsulfonate  
 Methylenebisthiocyanate  
 2-Nitrobutyl bromoacetate [CA Reg. No. 32815-96-6]  At a maximum level of 0.15 pound per ton of dry weight fiber.
 N-[α-(Nitroethyl)benzyl] ethylenediamine  
 Potassium 2-mercaptobenzothiazole  
 Potassium N-hydroxymethyl-N-methyldithiocarba-mate  
 Potassium N-methyldithiocarbamate  
 Potassium pentachlorophenate  
 Potassium trichlorophenate  
 Silver fluoride Limit of addition to process water not to exceed 0.024 pound, calculated as silver fluoride, per ton of paper produced. 
 Silver nitrate  
 Sodium dimethyldithiocarbamate  
 Sodium 2-mercaptobenzothiazole  
 Sodium pentachlorophenate  
 Sodium trichlorophenate  
 1,3,6,8-Tetraazatricyclo[6.2.1.13,6] dodecane  
 3,3,4,4-Tetrachlorotetrahydrothiophene-1,1-dioxide  
 Tetrakis(hydroxymethyl)phosphonium sulfate (CAS Reg. No. 55566-30-8)  Maximum use level of 84 mg/kg in the pulp slurry. The additive may also be added to water, which when introduced into the pulp slurry, results in a concentration in the pulp slurry not to exceed 84 mg/kg.
 2-(Thiocyanomethylthio) benzothiazole  
 Vinylene bisthiocyanate  


  (d) Adjuvant substances permitted to be used in the preparation of slimicides include substances generally recognized as safe for use in food, substances generally recognized as safe for use in paper and paperboard, substances permitted to be used in paper and paperboard by other regulations in this chapter, and the following:

  Acetone.

  Butlylene oxide.

  Dibutyl phthalate.

  Didecyl phthalate.

  N,N-Dimethylformamide.

  Dodecyl phthalate.

  Ethanolamine.

  Ethylene glycol.

  Ethylenediamine.

  N-methyl-2-pyrrolidone (CAS Reg. No. 872-50-4).

  a,a′-[Methylenebis[4-(1,1,3,3-tetra-methyl-butyl)-o-phenylene]] bis[omega-hydroxypoly (oxyethylene)] having 6-7.5 moles of ethylene oxide per hydroxyl group.

  Monomethyl ethers of mono-, di-, and tri-propyl-ene glycol.

  Nonylphenol reaction product with 9 to 12 molecules of ethylene oxide.

  Octylphenol reaction product with 25 molecules of propylene oxide and 40 molecules of ethylene oxide.

    [42 FR 14554, Mar. 15, 1977, as amended at 42 FR 41854, Aug. 19, 1977; 44 FR 75627, Dec. 21, 1979; 46 FR 36129, July 14, 1981; 49 FR 5748, Feb. 15, 1984; 51 FR 19059, May 27, 1986; 51 FR 43734, Dec. 4, 1986; 54 FR 18103, Apr. 27, 1989; 55 FR 31825, Aug. 6, 1990; 64 FR 46130, Aug. 24, 1999; 64 FR 69900, Dec. 15, 1999; 65 FR 40497, June 30, 2000; 65 FR 70790, Nov. 28, 2000; 69 FR 24512, May 4, 2004]

 地区: 美国 
 标签: 标识 辅料 标签 
食品伙伴网提供标准法规解读、舆情监控、合规咨询、申报注册等服务。
电询:0535-2129301
QQ:2891238009
食品标法圈
实时把握食品标法动态
请扫码关注食品标法圈

声明:

① 凡本网所有原始/编译文章及图片、图表的版权均属食品伙伴网所有,如要转载,需注明“信息来源:食品伙伴网”。
② 凡本网注明“信息来源:XXX(非食品伙伴网)”的作品,均转载自其他媒体,转载目的在于传递更多的信息,并不代表本网赞同其观点和对其真实性负责。
※ 邮箱:law#foodmate.net(发邮件时请将#换成@) QQ:139307733

 
 
[ 政策法规搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 [ 关闭窗口 ]

 

 
 
按分类浏览
国家法规 (11841) 国外法规 (3603)
地方法规 (41823) 法规动态 (2924)
法规解读 (2903) 其他法规 (536)
推荐国外法规
点击排行
    按国家或地区浏览

    法规中心  关于我们  广告业务  联系我们  信息服务

    Processed in 0.176 second(s), 10 queries, Memory 4.49 M