SOR/86-304 加拿大职业健康和安全条例(Canada Occupational Health and Safety Regulations)

　　Canada Occupational Health and Safety Regulations

　　1.1 - PART I

　　1.2 - Interpretation

　　1.3 - Prescription

　　1.4 - Application

　　1.5 - Records and Reports

　　1.6 - Inconsistent Provisions

　　1.8 - Alternate Media

　　2.1 - PART II PERMANENT STRUCTURES

　　2.1 - Interpretation

　　2.2 - DIVISION I BUILDINGS

　　2.2 - Standards

　　2.3 - Doors

　　2.4 - Clearances

　　2.5 - Floor and Wall Openings

　　2.6 - Open-top Bins, Hoppers, Vats and Pits

　　2.7 - Ladders, Stairways and Ramps

　　2.11 - Docks, Ramps and Dock Plates

　　2.12 - Guardrails

　　2.13 - Toe Boards

　　2.14 - Housekeeping and Maintenance

　　2.17 - Temporary Heating

　　2.18 - DIVISION II TOWERS, ANTENNAS AND ANTENNA-SUPPORTING STRUCTURES

　　2.20 - DIVISION III HVAC SYSTEMS

　　2.20 - Application

　　2.21 - Standards

　　2.23 - Records

　　2.24 - Operation, Inspection, Testing, Cleaning and Maintenance

　　2.27 - Investigations

　　3.1 - PART III TEMPORARY STRUCTURES AND EXCAVATIONS

　　3.1 - Application

　　3.2 - General

　　3.7 - Barricades

　　3.8 - Guardrails and Toe Boards

　　3.9 - Temporary Stairs, Ramps and Platforms

　　3.10 - Scaffolds

　　3.11 - Portable Ladders

　　3.12 - Excavation

　　3.13 - Safety Nets

　　3.14 - Housekeeping

　　4.1 - PART IV ELEVATING DEVICES

　　4.1 - Application

　　4.2 - Standards

　　4.3 - Use and Operation

　　4.5 - Inspection and Testing

　　4.7 - Repair and Maintenance

　　5.1 - PART V  BOILERS AND PRESSURE VESSELS

　　5.1 - Interpretation

　　5.2 - Application

　　5.3 - Fabrication and Installation Standards

　　5.5 - Use, Operation, Repair, Alteration and Maintenance

　　5.10 - Inspections

　　5.16 - Buried Pressure Vessels

　　5.17 - Records and Reports

　　6.1 - PART VI LIGHTING

　　6.1 - Interpretation

　　6.2 - Application

　　6.3 - Measurement of Average Levels of Lighting

　　6.4 - Lighting — Office Areas

　　6.5 - Lighting — Industrial Areas

　　6.6 - Lighting — General Areas

　　6.7 - Lighting — VDT

　　6.8 - Lighting — Aerodrome Aprons and Aircraft Stands

　　6.9 - Lighting — Artefactual Exhibits and Archival Materials

　　6.10 - Emergency Lighting

　　6.11 - Minimum Levels of Lighting

　　SCHEDULE I - LEVELS OF LIGHTING IN OFFICE AREAS

　　SCHEDULE II - LEVELS OF LIGHTING IN INDUSTRIAL AREAS

　　SCHEDULE III - LEVELS OF LIGHTING — GENERAL AREAS

　　7.1 - SCHEDULE IV - LEVELS OF LIGHTING — VDT WORK

　　7.1 - PART VII LEVELS OF SOUND

　　7.1 - Interpretation

　　7.2 - Measurement and Calculation of Exposure

　　7.3 - Hazard Investigation

　　7.4 - Limits of Exposure

　　7.5 - Reduction of Sound Exposure

　　7.6 - Report to Regional Health and Safety Officer

　　7.7 - Hearing Protection

　　7.8 - Warning Signs

　　SCHEDULE - MAXIMUM DURATION OF EXPOSURE TO A-WEIGHTED SOUND PRESSURE LEVELS IN THE WORK PLACE

　　8.1 - SCHEDULE II

　　8.1 - PART VIII ELECTRICAL SAFETY

　　8.1 - Interpretation

　　8.2 - Application

　　8.3 - Standards

　　8.4 - Safety Procedures

　　8.8 - Safety Watcher

　　8.9 - Coordination of Work

　　8.10 - Poles and Elevated Structures

　　8.12 - Isolation of Electrical Equipment

　　8.14 - Guarantees of Isolation for Electrical Equipment

　　8.17 - Live Test

　　8.18 - Termination of Guarantee of Isolation

　　8.19 - Safety Grounding

　　8.23 - Switches and Control Devices

　　SCHEDULE - DISTANCES FROM LIVE ELECTRICAL PARTS

　　9.1 - PART IX SANITATION

　　9.1 - Interpretation

　　9.2 - General

　　9.12 - Toilet Rooms

　　9.18 - Wash Basins

　　9.23 - Showers and Shower Rooms

　　9.24 - Potable Water

　　9.30 - Field Accommodation

　　9.34 - Preparation, Handling, Storage and Serving of Food

　　9.39 - Food Waste and Garbage

　　9.40 - Lunch Rooms

　　9.41 - Ventilation

　　9.43 - Clothing Storage

　　10.1 - SCHEDULE - MINIMUM VENTILATION REQUIREMENTS FOR CHANGE ROOMS, TOILET ROOMS AND SHOWER ROOMS

　　10.1 - PART X HAZARDOUS SUBSTANCES

　　10.1 - Interpretation

　　10.2 - Application

　　10.3 - DIVISION I GENERAL

　　10.3 - Records of Hazardous Substances

　　10.4 - Hazard Investigation

　　10.7 - Medical Examinations

　　10.8 - Storage, Handling and Use

　　10.13 - Warning of Hazardous Substances

　　10.14 - Employee Education

　　10.16 - Substitution of Substances

　　10.17 - Ventilation

　　10.19 - Control of Hazards

　　10.23 - Warnings

　　10.24 - Assembly of Pipes

　　10.25 - Explosives

　　10.26 - Ionizing and Non-ionizing Radiation

　　SCHEDULE - DEVICES TO BE REPORTED TO THE BUREAU OF RADIATION AND MEDICAL DEVICES

　　10.27 - DIVISION II HAZARDOUS SUBSTANCES OTHER THAN CONTROLLED PRODUCTS

　　10.27 - Identification

　　10.29 - DIVISION III CONTROLLED PRODUCTS

　　10.29 - Interpretation

　　10.30 - Application

　　10.31 - Material Safety Data Sheets and Labels in respect of Certain Controlled Products

　　10.32 - Supplier Material Safety Data Sheets

　　10.33 - Work Place Material Safety Data Sheets

　　10.34 - Availability of Material Safety Data Sheets

　　10.35 - Labels

　　10.37 - Portable Containers

　　10.38 - Special Cases

　　10.39 - Laboratories

　　10.40 - Signs

　　10.41 - Replacing Labels

　　10.42 - Exemptions from Disclosure

　　10.43 - Hazardous Waste

　　10.44 - Information Required in a Medical Emergency

　　10.45 - Fire and Explosion Prevention

　　11.1 - PART XI CONFINED SPACES

　　11.1 - Interpretation

　　11.2 - Hazard Assessment

　　11.3 - Entry Procedures

　　11.4 - Confined Space Entry

　　11.5 - Emergency Procedures and Equipment

　　11.6 - Record of Emergency Procedures and Equipment

　　11.7 - Provision and Use of Equipment

　　11.8 - Precaution

　　11.9 - Hot Work

　　11.10 - Ventilation Equipment

　　11.11 - Training

　　11.12 - Record Keeping

　　12.1 - PART XII SAFETY MATERIALS, EQUIPMENT, DEVICES AND CLOTHING

　　12.1 - General

　　12.4 - Protective Headwear

　　12.5 - Protective Footwear

　　12.6 - Eye and Face Protection

　　12.7 - Respiratory Protection

　　12.9 - Skin Protection

　　12.10 - Fall-Protection Systems

　　12.11 - Protection Against Drowning

　　12.12 - Loose Clothing

　　12.13 - Protection Against Moving Vehicles

　　12.14 - Records

　　12.15 - Instructions and Training

　　12.16 - Defective Protection Equipment

　　13.1 - PART XIII TOOLS AND MACHINERY

　　13.1 - Interpretation

　　13.2 - Design, Construction, Operation and Use of Tools

　　13.9 - Defective Tools and Machines

　　13.11 - Instructions and Training

　　13.13 - General Requirements for Machine Guards

　　13.14 - Use, Operation, Repair and Maintenance of Machine Guards

　　13.18 - Abrasive Wheels

　　13.20 - Mechanical Power Transmission Apparatus

　　13.21 - Woodworking Machinery

　　13.22 - Punch Presses

　　14.1 - PART XIV MATERIALS HANDLING

　　14.1 - Interpretation

　　14.2 - Application

　　14.3 - DIVISION I DESIGN AND CONSTRUCTION

　　14.3 - General

　　14.4 - Protection from Falling Objects

　　14.6 - Protection from Overturning

　　14.7 - Seat-Belts

　　14.8 - Fuel Tanks

　　14.9 - Protection from Elements

　　14.10 - Vibration

　　14.11 - Controls

　　14.12 - Fire Extinguishers

　　14.13 - Means of Entering and Exiting

　　14.14 - Lighting

　　14.15 - Control Systems

　　14.16 - Warning Devices

　　14.17 - Rear View Mirrors

　　14.18 - Guided Industrial Vehicles

　　14.19 - Conveyors

　　14.20 - DIVISION II MAINTENANCE, USE AND OPERATION

　　14.20 - Inspection, Testing and Maintenance

　　14.21 - Mobile Cranes

　　14.22 - Split Rim Wheels

　　14.23 - Instruction and Training

　　14.24 - Qualifications

　　14.25 - Signals

　　14.28 - Gradients

　　14.29 - Repairs

　　14.30 - Transporting and Positioning Employees

　　14.31 - Loading, Unloading and Maintenance While in Motion

　　14.34 - Positioning the Load

　　14.35 - Tools

　　14.36 - Housekeeping

　　14.37 - Parking

　　14.38 - Materials Handling Area

　　14.39 - Hazard Areas

　　14.40 - Rear Dumping

　　14.41 - Fuelling

　　14.42 - Ropes, Slings and Chains

　　14.43 - Safe Working Loads

　　14.44 - Aisles and Corridors

　　14.45 - Clearances

　　14.46 - DIVISION III MANUAL HANDLING OF MATERIALS

　　14.50 - DIVISION IV STORAGE OF MATERIALS

　　14.51 - DIVISION V TRANSITIONAL PROVISIONS

　　15.1 - PART XV HAZARDOUS OCCURRENCE INVESTIGATION, RECORDING AND REPORTING

　　15.1 - Interpretation

　　15.2 - Application

　　15.3 - Reports by Employee

　　15.4 - Investigations

　　15.5 - Telephone or Telex Reports

　　15.6 - Records

　　15.7 - Minor Injury Records

　　15.8 - Written Reports

　　15.10 - Annual Report

　　15.11 - Retention of Reports and Records

　　SCHEDULE I

　　16.1 - SCHEDULE II

　　16.1 - PART XVI FIRST AID

　　16.1 - Interpretation

　　16.2 - General

　　16.3 - First Aid Attendants

　　16.5 - First Aid Stations

　　16.6 - Communication of Information

　　16.7 - First Aid Supplies and Equipment

　　16.9 - First Aid Rooms

　　16.11 - Transportation

　　16.12 - Teaching First Aid

　　16.13 - Records

　　SCHEDULE I - REQUIREMENTS FOR FIRST AID KITS

　　SCHEDULE II - CONTENT OF FIRST AID KITS

　　SCHEDULE III - ADDITIONAL FIRST AID SUPPLIES AND EQUIPMENT FOR REMOTE WORKPLACES

　　SCHEDULE IV - FIRST AID ROOM SUPPLIES AND EQUIPMENT

　　17.1 - SCHEDULE V

　　17.1 - PART XVII SAFE OCCUPANCY OF THE WORK PLACE

　　17.1 - Interpretation

　　17.2 - Application

　　17.3 - Fire Protection Equipment

　　17.4 - Emergency Evacuation Plan

　　17.5 - Emergency Procedures

　　17.6 - Instructions and Training

　　17.7 - Emergency Wardens

　　17.9 - Inspections

　　17.10 - Meetings of Emergency Wardens and Drills

　　17.11 - Fire Hazard Areas

　　18.1 - PART XVIII DIVING OPERATIONS

　　18.1 - Definitions

　　18.2 - Application

　　18.4 - DIVISION I TYPE 1 DIVES AND TYPE 2 DIVES

　　18.4 - Written Procedures

　　18.5 - Instruction and Training

　　18.7 - Medical Evaluations

　　18.8 - Fitness to Dive

　　18.9 - Dive Plan

　　18.10 - Dive Team

　　18.15 - Emergency Assistance

　　18.16 - Pressure-related Injury

　　18.17 - Decompression

　　18.18 - Identification of Dive Site

　　18.19 - Supervision

　　18.21 - Hazards

　　18.22 - Communications

　　18.23 - Breathing Supply

　　18.26 - Diving Equipment

　　18.34 - Termination of Dive

　　18.35 - Observation After Diving

　　18.36 - Flying After Diving

　　18.37 - Reports and Records

　　18.43 - DIVISION II TYPE 2 DIVES

　　18.43 - Approach to Water Control and Intake Facilities

　　18.47 - Diving Hazards

　　18.49 - Use of Explosives

　　18.50 - Hyperbaric Chambers

　　18.52 - Alternative Energy Sources

　　18.53 - Surface Supply Type 2 Dives

　　18.63 - Type 2 Scuba Diving

　　SCHEDULE I - DIVER’S FLAG

　　19.1 - SCHEDULE II - INTERNATIONAL CODE FLAG A

　　19.1 - PART XIX HAZARD PREVENTION PROGRAM

　　19.1 - Hazard Prevention Program

　　19.2 - Implementation Plan

　　19.3 - Hazard Identification and Assessment Methodology

　　19.4 - Hazard Identification and Assessment

　　19.5 - Preventive Measures

　　19.6 - Employee Education

　　19.7 - Program Evaluation

　　19.8 - Reports

　　20.1 - PART XX VIOLENCE PREVENTION IN THE WORK PLACE

　　20.1 - Interpretation

　　20.3 - Work Place Violence Prevention Policy

　　20.4 - Identification of Factors that Contribute to Work Place Violence

　　20.5 - Assessment

　　20.6 - Controls

　　20.7 - Work Place Violence Prevention Measures Review

　　20.8 - Procedures in Response to Work Place Violence

　　20.9 - Notification and Investigation

　　20.10 - Training

　　具体内容请详见 加拿大职业健康和安全条例.pdf