当前位置: 首页 » 政策法规 » 国外法规 »§ 570.18 相关食品添加剂的容许量 (Tolerances for related food additives)

§ 570.18 相关食品添加剂的容许量 (Tolerances for related food additives)

扫描二维码 分享好友和朋友圈
放大字体  缩小字体 2011-09-05 15:25:10  来源:GPO  浏览次数:3952
核心提示:具有相似或相关药理学作用的食品添加剂被归为一类,没有异样且含有毒副作用,被认为是相关食品添加剂,相关食品添加剂限量的制定可能会限制正常食品成分或生物活性成分或其他已存相关食品添加剂的量,食品中同类多种食品添加剂的量与一种同类的最低限量相同,同时本条例针对同一食品中多种食品添加剂的残留测定和计算方法进行了规定。
发布单位
FDA
FDA
发布文号 暂无
发布日期 暂无 生效日期 暂无
有效性状态 废止日期 暂无
备注 具有相似或相关药理学作用的食品添加剂被归为一类,没有异样且含有毒副作用,被认为是相关食品添加剂,相关食品添加剂限量的制定可能会限制正常食品成分或生物活性成分或其他已存相关食品添加剂的量,食品中同类多种食品添加剂的量与一种同类的最低限量相同,同时本条例针对同一食品中多种食品添加剂的残留测定和计算方法进行了规定。

      更多关于食品添加剂的法规,请详见美国FDA 21 CFR 第570部分关于食品添加剂的法规汇总

  § 570.18   Tolerances for related food additives.

  (a) Food additives that cause similar or related pharmacological effects will be regarded as a class, and in the absence of evidence to the contrary, as having additive toxic effects and will be considered as related food additives.

  (b) Tolerances established for such related food additives may limit the amount of a common component that may be present, or may limit the amount of biological activity (such as cholinesterase inhibition) that may be present or may limit the total amount of related food additives that may be present.

  (c) Where food additives from two or more chemicals in the same class are present in or on a food, the tolerance for the total of such additives shall be the same as that for the additive having the lowest numerical tolerance in this class, unless there are available methods that permit quantitative determination of the amount of each food additive present or unless it is shown that a higher tolerance is reasonably required for the combined additives to accomplish the physical or technical effect for which such combined additives are intended and that the higher tolerance will be safe.

  (d) Where residues from two or more additives in the same class are present in or on a food and there are available methods that permit quantitative determination of each residue, the quantity of combined residues that are within the tolerance may be determined as follows:

  (1) Determine the quantity of each residue present.

  (2) Divide the quantity of each residue by the tolerance that would apply if it occurred alone, and multiply by 100 to determine the percentage of the permitted amount of residue present.

  (3) Add the percentages so obtained for all residues present.

  (4) The sum of the percentages shall not exceed 100 percent.

食品伙伴网提供标准法规解读、舆情监控、合规咨询、申报注册等服务。
电询:0535-2129301
QQ:2891238009
食品标法圈
实时把握食品标法动态
请扫码关注食品标法圈

声明:

① 凡本网所有原始/编译文章及图片、图表的版权均属食品伙伴网所有,如要转载,需注明“信息来源:食品伙伴网”。
② 凡本网注明“信息来源:XXX(非食品伙伴网)”的作品,均转载自其他媒体,转载目的在于传递更多的信息,并不代表本网赞同其观点和对其真实性负责。
※ 邮箱:law#foodmate.net(发邮件时请将#换成@) QQ:139307733

 
 
[ 政策法规搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 [ 关闭窗口 ]

 

 
 
按分类浏览
国家法规 (11841) 国外法规 (3603)
地方法规 (41823) 法规动态 (12)
法规解读 (2903) 其他法规 (536)
推荐国外法规
点击排行
    按国家或地区浏览

    法规中心  关于我们  广告业务  联系我们  信息服务

    Processed in 0.089 second(s), 11 queries, Memory 4.45 M